Set the switch on the back of the VCR to channel '3.' Optionally, use channel '4' if necessary.Power on the television and the VCR. Tune the television to channel 3 (or channel 4 if it is being used by the VCR).
Record Vcr Tape To Computer
Record Hdmi To Vhs
If nothing shows up on the television, press the 'Input Source' or 'TV/VCR' button on the remote or the front panel of the VCR until the setup or default screen from the VCR is showing on the television.Access the setup menu for the VCR and configure the settings to allow the VCR to search for all available settings. The steps for this will vary by brand and model.Tune the VCR to the desired channel so that the show is visible on the television.Press the 'Speed' button to set the tape speed. The 'SP,' or standard speed, setting allows each standard tape to record two hours of programming, while the 'LP' setting allows a standard tape to record slower, reducing quality and extending the recording time to four hours. Also available is the 'SLP' setting, which allows the tape to record over six hours of programming, but at an inferior quality.
There are different type of VHS tapes, so maximum recording times will vary.Press the 'Record' button just prior to the desired show coming on the television. Press the 'Stop' button when the show is over, and press 'Rewind' to rewind the tape. Alternately, allow the tape to continue recording until the tape has run out, at which point the VCR will automatically shut down the recording process and rewind the tape.Refer to the owner's manual or the manufacturer's website for the details on how to set up scheduled recording, as this varies significantly by brand and model of VCR.